*UPGRADE IN PROGRESS* -- CareerCircle platform upgrades will occur between Monday June 27th 10PM Eastern Time through Tuesday June 28th 4AM Eastern Time.&nbsp; The system may be intermittently unavailable during this timeframe.&nbsp;&nbsp;

*UPGRADE IN PROGRESS* -- CareerCircle is upgrading its capabilities and as a result the system may be temporarily unavailable as we bring new capabilities and infrastructure online to better serve our members.&nbsp; If you receive an error during this timeframe please bear with us as we're working to improve our system and you may need to retry that operation at a later time.&nbsp; &nbsp;

BHI Energy is currently looking for equipment operators to work at the Marshall Steam Station, located in Terrell, NC. This is a local hire position and does not pay Perdiem or any relocation fees. In this position as an equipment operator, you must be able and willing to learn how to use lawn equipment (i.e. zero turn tractor, and other lawn equipment). Must be able to travel when needed. This is a long-term project offering competitive wages, benefits (medical/dental/vacation/401K) and advancement opportunities. <ul> <li> Must be able to pass a drug test. </li> <li> Must be able to pass a security background. </li> <li> Must be 18yrs of age. </li> </ul> EOE of Minorities / Females / Vets / Disability Code: NW Code: RT Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

public

CCP Equipment Operator

Location: Tulsa, OK Accepting resumes for Industrial Electricians for power plant outage support work during the spring outage season starting in February at PSO generation facilities in the Tulsa, Oklahoma area. Applicants must have a minimum of 5 years journeyman level industrial experience. Compensation: Wage: $30-36/hour (depending on experience). Per Diam available if you live outside 50 miles from jobsite. Skills needed: Raceway and wiring installation, as well as wire terminations and troubleshooting with the ability to interpret installation drawings and wiring diagrams. Must demonstrate a willingness to work safely in all situations. State license or NCCER are a plus but not necessarily required if there is adequate experience. Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Industrial Electricians

JR Health Physics Technician Provide Radiation Protection coverage and oversight as required for power-plant activates. In addition to providing job coverage, certain routine tasks may be assigned commensurate with individual certifications, qualifications, and skills. Types of tasks Jr RP Technicians may be assigned to perform or assist in performing include the following: <ul> <li> radiation and contamination surveys </li> <li> material and equipment surveys </li> <li> material escort </li> <li> assisting with ALARA planning </li> <li> assisting with decontamination activities </li> <li> support of Site Emergency Plan </li> </ul> <ul> <li> coverage of primary work activities such as: </li> </ul> <ul> <li> <ul> <li> filter changes </li> <li> valve work </li> <li> fuel handling / storage </li> <li> refueling activities </li> <li> underwater diving </li> <li> pump work including reactor coolant pump seals </li> <li> reactor head disassembly/reassemble </li> <li> containment hatch watch </li> <li> steam generator maintenance activities </li> </ul> </li> </ul> Education / Training Requirements <ul> <li> High School Diploma or GED </li> <li> Workers must be trained in accordance with applicable local, state, and federal OSHA, DOT, and EPA regulations. </li> <li> Satisfy all requirements required to obtain a Level II Nuclear Access Badge </li> <li> Competition of GAP training / CIRP Task of the NISP-RP-12 (Nuclear Industry Standard Process) </li> </ul> Minimum Skill Requirements and Accountabilities <ul> <li> Meet all applicable requirements to maintain unescorted access </li> <li> Safe use and proper operation of applicable equipment </li> <li> Use and adhere to station policies and procedures. </li> <li> Effectively communicate and interact with co-workers, Supervisors and Sponsors to ensure Safe and Quality job completion for all assignments </li> <li> Ability to understand and follow oral and written communications, technical requirements, procedures and directives associated with working at a nuclear plant </li> <li> Ability to climb and work in adverse conditions such as high temperature areas, confined spaces, and heights. </li> <li> Able to lift 50 pounds </li> <li> Ability to be respirator qualified </li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Junior Health Physics - DC Cook

Are you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. If this sounds like an environment you would thrive in, Core Engineering has an exciting opportunity for an experienced Reactor Core Thermal Hydraulic Design Senior Engineer (hybrid work arrangement) to join the Fuel Rod & Thermal-Hydraulic Design team. Your Day-to-Day:<ul> <li>Participate in introductory training focused on standard analyses and obtain qualifications in the Reactor Core Thermal Hydraulic Design Functional Area</li> <li>Reactor Core Thermal Hydraulics addresses heat removal from the reactor fuel and coolant flow in the reactor core under normal operation and accident conditions. Perform standard and non-standard Reactor Core Thermal Hydraulic analysis work for US and international customers, following and understanding approved methodologies, procedures and internal processes while maintaining focus on nuclear safety and quality to produce error-free work. Analyses will support safe plant operation by determining design bases and limits that meet safety and regulatory criteria for plant, reactor core and fuel design; quantifying thermal margins; and identifying and evaluating risks to plant safety and fuel performance.</li> </ul> <ul> <li>Resolve and provide technical leadership for complex, emergent and industry issues, redesigns, model development and interface with our customer base and other functional groups within Westinghouse to support safe plant operation</li> <li>Support and provide technical leadership for special projects such as major programs, advanced plant designs, plant chemistry programs, development of new fuel products, including new cladding and fuel materials, etc.</li> <li>Provide expertise and consultation to technical panels, reviews, committees, regulators, customers, and partners on various Reactor Core Thermal Hydraulic related topics</li> <li>Support general code, procedure and method development updates</li> <li>Improve and develop automation (via Java, Python, or other object-oriented programming) to promote efficiency and error reduction for standard analyses and documentation</li> <li>Mentor and provide Reactor Core Thermal Hydraulic related training to less experienced engineering and customers</li> </ul>Who You Are: As a successful candidate, you will bring the following to the team:<ul> <li>Bachelor's degree in Engineering (e.g. Nuclear, Mechanical, etc.) or related Discipline preferred or recognized equivalent required</li> <li>Minimum 3-7 years of engineering experience</li> <li>Reactor core Thermal Hydraulic related experience with familiarity in subchannel codes is a plus</li> <li>Strong and effective written and verbal communication skills and comfortable leading meetings and developing and delivering presentations</li> <li>Strong interpersonal skills, experience working effectively in a team environment</li> <li>Engineer in Training (EIT) or Professional Engineer (PE) Certification is a plus</li> <li>Computer programing skills preferred but not required</li> </ul> Why Westinghouse? Westinghouse Electric Company is the global nuclear energy industry's first choice for safe, clean, and efficient energy solutions. We enable our delivery of this vision by living our value system: <ul> <li> Safety and Quality </li> <li> Integrity and Trust </li> <li> Customer Focus and Innovation </li> <li> Speed and Passion to Win </li> <li> Teamwork and Accountability </li> </ul> Westinghouse offers competitive benefits to all our employees around the globe to keep them healthy and enhance their well-being. In the U.S. the following are representative of what we offer: <ul> <li> Competitive Salary </li> <li> Comprehensive Health, Wellness and Income Protection Benefits </li> <li> 401(k) Savings Plan with Company Match </li> <li> Paid Vacations and Holidays </li> <li> Opportunities for Flexible Work Arrangements </li> <li> Educational Reimbursement Program </li> <li> Employee Referral Program </li> </ul> While our Global Headquarters are located in Cranberry Township, PA, we have over 9,000 employees working at locations in 19 different countries. You can learn more by visiting http://www.westinghousenuclear.com . EOE of Minorities / Females / Vets / Disability. Get connected with Westinghouse on social media: Twitter | Facebook | LinkedIn | YouTube Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Reactor Core Thermal Hydraulic Design Senior Engineer

JR Health Physics Technician Provide Radiation Protection coverage and oversight as required for power-plant activates. In addition to providing job coverage, certain routine tasks may be assigned commensurate with individual certifications, qualifications, and skills. Types of tasks Jr HP Technicians may be assigned to perform or assist in performing include the following: <ul> <li> radiation and contamination surveys </li> <li> material and equipment surveys </li> <li> material escort </li> <li> assisting with ALARA planning </li> <li> assisting with decontamination activities </li> <li> support of Site Emergency Plan </li> </ul> <ul> <li> coverage of primary work activities such as: </li> </ul> <ul> <li> <ul> <li> filter changes </li> <li> valve work </li> <li> fuel handling / storage </li> <li> refueling activities </li> <li> underwater diving </li> <li> pump work including reactor coolant pump seals </li> <li> reactor head disassembly/reassemble </li> <li> containment hatch watch </li> <li> steam generator maintenance activities </li> </ul> </li> </ul> Education / Training Requirements <ul> <li> High School Diploma or GED </li> <li> Workers must be trained in accordance with applicable local, state, and federal OSHA, DOT, and EPA regulations. </li> <li> Satisfy all requirements required to obtain a Level II Nuclear Access Badge </li> <li> Competition of GAP training / CIRP Task of the NISP-RP-12 (Nuclear Industry Standard Process) </li> </ul> Minimum Skill Requirements and Accountabilities <ul> <li> Meet all applicable requirements to maintain unescorted access </li> <li> Safe use and proper operation of applicable equipment </li> <li> Use and adhere to station policies and procedures. </li> <li> Effectively communicate and interact with co-workers, Supervisors and Sponsors to ensure Safe and Quality job completion for all assignments </li> <li> Ability to understand and follow oral and written communications, technical requirements, procedures and directives associated with working at a nuclear plant </li> <li> Ability to climb and work in adverse conditions such as high temperature areas, confined spaces, and heights. </li> <li> Able to lift 50 pounds </li> <li> Ability to be respirator qualified </li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Junior Health Physics - STP

Contact Recruiter: Joey Melanson 508-591-1272 Recruiter Email: Joey.Melanson@westinghouse.com Opportunity Overview: Jr. Radiation Protection Technician Westinghouse has an exciting opportunity for a Junior Radiation Protection Technician. A Junior Radiation Protection Technician is needed to support work at our Palo Verde location in AZ. Work includes surveillance of radiological work areas, radioactive material management, data/records management, radiological sample collection/analysis, air monitoring and sampling. What your day-to-day looks like: <ul> <li> Perform radiation control work activities in support of maintenance, decontamination and compliance operations. </li> <li> Perform radiological surveys (radiation, contamination, and airborne radioactivity) of work areas and generate associated documents. </li> <li> Perform release surveys of materials, equipment and property from areas controlled for radiological purposes to uncontrolled areas. </li> <li> Evaluate radiological conditions within various types of facilities and post areas and items controlled for radiological purposes. </li> <li> Conduct and/or support assessments, audits and other measures needed regarding radiological incidents. Respond to contaminated personnel/areas and other radiological incidents and emergencies and participate in corrective action. </li> <li> Provide radiological support during preparation, packaging, and shipment/transfer of radioactive materials and wastes. </li> </ul> What we need to see from you: <ul> <li> Education, or combination of education and experience, in which advanced technical concepts and principles are acquired in the field of radiation protection/health physics. </li> <li> 1 + years of relevant experience in radiation measurement, radioisotope handling and radiation monitoring, including 1 year as a qualified Radiation Control Technician or Health Physics Technician. </li> <li> Ability to apply advanced radiation safety, radiation measurement and radioisotope handling principles in general assignments. </li> <li> Demonstrated ability to work independently and as part of a radiation protection team given broad and general program/project directions. </li> <li> Must be able to perform the physical requirements of the position including - routinely lift and transport of 40 pounds, frequently bend and stoop & stand and walk for 4-6 hours per day. </li> <li> Successfully pass a routine medical examination as well as successfully pass applicable training including Respirator Fit Testing. </li> </ul> Our Safety Pledge to You: If you are as committed to your success as we are committed to your safety, then this is the position for you! For us, our guiding principle has always been and will continue to be the safety of our people. It's that simple! Why WECTEC Staffing Services? Through the ever changing and rapidly evolving contract labor market we continue to employ experienced, highly motivated, and qualified employees with proven track records to meet our clients' needs. We have expanded our scope of services outside of the nuclear industry to include international contracts in more than five countries. Our dedicated employees range in expertise from highly specialized technical niche positions to corporate function positions and we want YOU to be a part of our impressive talent network! Additionally, WECTEC Staffing Services offers competitive pay as well as benefits to qualifying positions. To learn more about us visit www.wectecstaffing.com EOE of Minorities/Females/Vets/Disability Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Jr. Radiation Protection Technician

Are you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. If this sounds like an environment you would thrive in, we have numerous opportunities for New Graduate Mechanical Engineers. Please note relocation assistance is not provided for this position. The successful candidate can expect to perform the following: * Develop expertise in the design, construction, operation, and decommissioning of nuclear power plants. * Grow and develop extensive technical expertise in US and international nuclear markets. * Work in teams to resolve critical issues impacting the construction and operation of nuclear power plants. * Develop and maintain an effective business relationship with Westinghouse customers Who You Are: As a successful candidate, you will bring the following to the team: * May 2023 Graduate (or 2022 Graduates) with a Bachelor's Degree in Mechanical Engineering Required. * Minimum 3.0 GPA Required * Prior Internship experience is a plus * Prior experience with Technical Engineering Projects and/or Research is a plus * Strong technical aptitude required - Passion for Technical Design and Analysis * Eagerness to learn and master engineering software required. * Engineering in Training Certification is a plus or desire to obtain with long term goal of obtaining P.E. * Must strongly value safety & quality * Eager to learn the design and operation of pressurized water reactor (PWR) nuclear power plants * Excellent oral and written communication skills * Develop and deliver technical presentations to communicate a variety of issues: project status, problem resolution, engineering recommendations, etc. Why Westinghouse? Westinghouse Electric Company is the global nuclear energy industry's first choice for safe, clean, and efficient energy solutions. We enable our delivery of this vision by living our value system: <ul> <li> Safety and Quality </li> <li> Integrity and Trust </li> <li> Customer Focus and Innovation </li> <li> Speed and Passion to Win </li> <li> Teamwork and Accountability </li> </ul> While our Global Headquarters are located in Cranberry Township, PA, we have over 9,000 employees working at locations in 19 different countries. You can learn more by visiting http://www.westinghousenuclear.com . EOE of Minorities / Females / Vets / Disability. Get connected with Westinghouse on social media: Twitter | Facebook | LinkedIn | YouTube Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Mechanical Engineers - 2023 College Graduates - Entry Level

Westinghouse is seeking a Corporate Communications Manager for a 6+ month project supporting our energy client in Houston, Tx. Job Summary : Reporting to the Senior Director of Communications, this role is focused on developing various communications to inform stakeholders (internal and external) of corporate messages and activities. This role is also instrumental in driving our client's philanthropic efforts through corporate volunteerism and charity engagement. Applicants for this position should possess strong communication skills (both written and verbal), creative and strategic thinking, project management, acute attention to detail and consistently high-quality production. Proficiency in the Microsoft Office Suite of products (especially PowerPoint, Word and Excel) and extensive knowledge of AP Style are required. Working or advanced knowledge of graphic design and experience using the Adobe Design suite (InDesign, Illustrator, etc.) of applications is preferred. Agency and/or energy industry experience is a plus. Key Job Responsibilities: <ul> <li>Responsible for the development and execution of a wide range of editorial projects for external and internal audiences.</li> <li>Creates, implements and oversees communications programs that effectively describe and promote the organization and its products.</li> <li>Develops creative, clearly written material in support of the organization's communications strategies.</li> <li>Plans, develops and contributes to communications such as internal employee newsletters and messages, company intranet, digital signage, press releases, scripts, external and internal web content and presentations.</li> <li>Responsible for website and intranet updates.</li> <li>Designs, plans, manages and writes communications that enhance our client's relations with the community, the public, governmental and regulatory authorities and employees.</li> <li>Works closely with External Affairs to coordinate distribution of the organization's messages through news or trade media contacts, special events, public speaking or other means to reach defined audiences to meet specific program objectives.</li> <li>May act as the organization's representative in community projects and other public or social gatherings.</li> <li>Manages relationships and negotiates with outsourced vendors on communication-related projects.</li> <li>May counsel top management and/or other departments on effective communication strategy and policy.</li> </ul> Job Scope & Technical Excellence <ul> <li>Comprehensive knowledge.</li> <li>Manages single function or portion of a department with an operational/financial focus.</li> </ul> Decision Making & Innovation <ul> <li>May make decisions for large-scale projects, a closely related set of projects and initiatives involving own and possibly related functional areas.</li> <li>May make recommendations on new processes, tools and services; will support and contribute to development of new products, services or techniques.</li> </ul> Work Complexity & Independent Judgement <ul> <li>Receives assignments in the form of objectives and determines tactical approach, resources, schedules and goals.</li> <li>Works within general guidelines; applies advanced technical knowledge to solve moderately complex problems for a function.</li> <li>Works on problems of diverse scope ranging from moderate to complex.</li> <li>Uses independent judgment requiring in-depth analysis of variable factors. Collaborates with senior professionals in selection of methods, techniques, and analytical approach.</li> </ul> Education & Experience <ul> <li>Bachelor's Degree or equivalent in Business, Communications, Journalism or related field.</li> <li>Seasoned professional; 7+ years' experience.</li> <li>Demonstrated business writing skills (including use of AP Style).</li> <li>Proficiency in Microsoft Office Suite - especially Word, PowerPoint and Excel.</li> <li>Working knowledge of graphic design basics and use of Adobe Design Suite of applications (InDesign, Illustrator, etc.).</li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Corporate Communications Manager

Westinghouse is seeking a Sr. IS Analyst to support a 6+ month project for our energy client in Houston, Texas.<ul> <li>Responsible for gathering design, coordination, testing and support of customer intelligence reporting and the analytic needs.</li> <li>May work as a liaison between IT and Business to ensure proper testing is done to meet requirements.</li> <li>May assess the appropriateness and effectiveness of a particular policy.</li> <li>Identify and implement best practices to communicate and publish.</li> <li>May Coordinate and lead business requirements gathering meetings with management and business users of the company.</li> <li>Possibly ensure that relevant documents of system set up and working practices is established and maintained reflecting any changes as a result of development.</li> <li>Will Providing support and training associated with the operation of the systems, including induction and refresher training and arranging externally provided training if required</li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Sr. IS Analyst

We are currently seeking a Technical Publication Manager on behalf of our client, a leading supplier and integrator in today's power and energy markets. This is 1 yr. contract assignment. The ideal candidate will be responsible for overseeing the entire publication lifecycle of technical documents for our products and services. You will manage both internal and external resources, comprised of technical writers, editors, illustrators, and other specialists who produce manuals, guides, reports, proposals, white papers, training videos, augmented reality solutions, on-line help solutions and more. The person will be ensuring the quality, accuracy, consistency, and compliance of technical documents with relevant standards, regulations, and best practices. The person will also coordinate with internal and external stakeholders, such as engineers, product managers, customers, vendors, and media, to gather information, feedback, and requirements for technical publications. Location: Westborough, MA Hybrid position: 4 days in office with one at home Responsibilities Publication Management <ul> <li> Manage an internal and external team of technical publication specialists who produce technical documents, such as manuals, guides, reports, proposals, white papers, training videos, augmented reality solutions, on-line help solutions, etc. </li> <li> Ensure the quality, accuracy, consistency, and compliance of technical documents with relevant standards, regulations, and best practices. </li> <li> Coordinate with internal and external stakeholders, such as engineers, product managers, customers, vendors, and media, to gather information, feedback, and requirements for technical publications. </li> <li> Establish and maintain publication processes, procedures, tools, and templates to optimize workflow and efficiency. </li> <li> Plan, prioritize, assign, and monitor publication projects and deadlines. </li> <li> Review, edit, and approve technical documents before publication or delivery. </li> </ul> Publication Strategy <ul> <li> Develop and implement publication strategies, policies, and guidelines to align with organizational goals and objectives. </li> <li> Evaluate and report on the performance, effectiveness, and impact of technical publications. </li> <li> Research and stay updated on the latest trends, technologies, and best practices in technical communication and publication. </li> <li> Identify opportunities for publication innovation and improvement based </li> </ul> Key knowledge, Skill, Abilities, and Attitudes <ul> <li> Excellent written and verbal communication skills, with the ability to convey complex technical information in a clear, concise, and engaging manner. </li> <li> Strong leadership, management, and organizational skills, with the ability to motivate, mentor, and supervise a team of internal and external technical publication specialists. </li> <li> Proficient in various publication tools, software, and platforms, such as Microsoft Office, Adobe Creative Suite, RoboHelp, Framemaker, Heretto, xDocs, or other cCMS solutions, etc. </li> <li> Knowledgeable in various publication standards, formats, and styles, such as APA, MLA, Chicago, IEEE, etc. </li> <li> Familiar with various technical domains, concepts, and terminology, depending on the industry and audience of the technical publications. </li> <li> Creative, analytical, and problem-solving skills, with the ability to generate innovative and effective publication solutions. </li> <li> Detail-oriented, quality-focused, and customer-oriented, with the ability to ensure the accuracy, consistency, and relevance of technical publications. </li> <li> Flexible, adaptable, and collaborative, with the ability to work independently or as part of a team, under pressure and with changing priorities and deadlines. </li> <li> Passion for technology, innovation, and continuous learning. </li> </ul> Requirements Education/ Experience <ul> <li> Bachelor's degree in engineering, technical communication, technology journalism, or a related field, or equivalent practical experience. </li> <li> Five years of experience in technical writing, editing, or publication for highly technical, safety-critical industrial equipment with long lifecycles and many stakeholders. </li> <li> Experience in the renewable energy or energy storage industry is a plus. </li> <li> Travel </li> <li> Up to 10% domestic and international travel will be required for field, customer and supplier visits and for collaboration with colleagues both domestically and internationally. </li> </ul> EOE of Minorities / Females / Vets / Disability. PT: 0516 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Technical Publication Manager

JR Radiation Protection Technician Provide Radiation Protection coverage and oversight as required for power-plant activates. In addition to providing job coverage, certain routine tasks may be assigned commensurate with individual certifications, qualifications, and skills. Types of tasks Jr RP Technicians may be assigned to perform or assist in performing include the following: <ul> <li> radiation and contamination surveys </li> <li> material and equipment surveys </li> <li> material escort </li> <li> assisting with ALARA planning </li> <li> assisting with decontamination activities </li> <li> support of Site Emergency Plan </li> </ul> <ul> <li> coverage of primary work activities such as: </li> </ul> <ul> <li> <ul> <li> filter changes </li> <li> valve work </li> <li> fuel handling / storage </li> <li> refueling activities </li> <li> underwater diving </li> <li> pump work including reactor coolant pump seals </li> <li> reactor head disassembly/reassemble </li> <li> containment hatch watch </li> <li> steam generator maintenance activities </li> </ul> </li> </ul> Education / Training Requirements <ul> <li> High School Diploma or GED </li> <li> Workers must be trained in accordance with applicable local, state, and federal OSHA, DOT, and EPA regulations. </li> <li> Satisfy all requirements required to obtain a Level II Nuclear Access Badge </li> <li> Competition of GAP training / CIRP Task of the NISP-RP-12 (Nuclear Industry Standard Process) </li> </ul> Minimum Skill Requirements and Accountabilities <ul> <li> Meet all applicable requirements to maintain unescorted access </li> <li> Safe use and proper operation of applicable equipment </li> <li> Use and adhere to station policies and procedures. </li> <li> Effectively communicate and interact with co-workers, Supervisors and Sponsors to ensure Safe and Quality job completion for all assignments </li> <li> Ability to understand and follow oral and written communications, technical requirements, procedures and directives associated with working at a nuclear plant </li> <li> Ability to climb and work in adverse conditions such as high temperature areas, confined spaces, and heights. </li> <li> Able to lift 50 pounds </li> <li> Ability to be respirator qualified </li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

We are searching for an Instrument & Controls (I&C) Engineer for a 11 month contract assignment. In this position, engineers will act as the crucial technical interface with engineering firms during various project developments. Your duties will also include preparing and reviewing engineering documents, ensuring they meet all necessary industry, nuclear, and regulatory standards. Location: Remote or Jupiter, FL Essential Job Functions: <ul> <li> The nature of the projects varies from minor digital software adjustments to extensive I&C systems upgrades requiring prior NRC approval. </li> <li> Familiarity with I&C systems such as ladder logic, analog/digital systems, and power systems analysis is highly desired. </li> <li> Experience working with instrumentation and control systems such as ladder logic, analog/digital systems, power system analysis, and computational tools is preferential but optional. </li> <li> Similarly, experience as a cognizant engineer or in engineering project management will be valued." </li> </ul> <ul> <li> 10 CFR 50.59 (Code of Federal Regulations - 50.59 Changes, tests, and experiments for Digital) Failure Modes and Effects for Digital Systems SQA (Software Quality Assurance) Cyber Security </li> </ul> Qualifications / Education / Experience: <ul> <li> Bachelor's Degree in Engineering. </li> <li> 5- 10 years of experience </li> <li> Excellent verbal, written communication skills required. </li> <li> EMI/RFI (Electromagnetic and Radio Frequency Interference) RG 1.180 R1, EPRI TR 102323 R5 </li> <li> Mentoring new engineers will be required. </li> <li> Digital Platform Experience - can vary from simple parameterization of a recorder or transmitter to integrated PLC (Programmable Logic Controller) and HMI (Human Machine Interface). </li> </ul> Platforms used includes some of the following: <ul> <li> Non-Safety Related: </li> <li> Foxboro IA </li> <li> Allen Bradley </li> <li> GE Mark VIe </li> <li> Ovation </li> <li> Safety Related: </li> <li> Triconex </li> </ul> EOE of Minorities / Females / Vets / Disability. FL: 16516 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

I&C Engineer

Opportunity Overview: I&C / Electrical Planner - 12+ month Contract - Pottstown, PA WECTEC Staffing/Westinghouse has a great opportunity for an experienced I&C Planner to support Westinghouse project work at Limerick Nuclear Power Plant in Pottstown, PA What your day-to-day looks like: <ul> <li> Take Approved Design/Engineering Change Package and develop Work Order and write work steps for field implementation </li> <li> Field Engineering support to walkdown the modification for constructability </li> <li> Develop BOM (Bill of Material) for ordering of parts and issuance to the project </li> </ul> What we need to see from you: <ul> <li> High School Graduate or Equivalent </li> <li> Additional education in I&C, Engineering preferred </li> <li> Current Qualifications for Planning APS </li> <li> Experienced I&C/Electrical Nuclear Planner in the Nuclear Industry </li> <li> 6-8 + years of experience in the Electrical /I&C nuclear field </li> </ul> Our Safety Pledge to You: If you are as committed to your success as we are committed to your safety, then this is the position for you! For us, our guiding principle has always been and will continue to be the safety of our people. It's that simple! Why WECTEC Staffing Services? Through the ever changing and rapidly evolving contract labor market we continue to employ experienced, highly motivated, and qualified employees with proven track records to meet our clients' needs. We have expanded our scope of services outside of the nuclear industry to include international contracts in more than five countries. Our dedicated employees range in expertise from highly specialized technical niche positions to corporate function positions and we want YOU to be a part of our impressive talent network! Additionally, WECTEC Staffing Services offers competitive pay as well as benefits to qualifying positions. To learn more about us visit www.wectecstaffing.com EOE of Minorities/Females/Vets/Disability Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

I&C / Electrical Planner

We are searching for Project Engineer, Sr. for a 1 yr. contract assignment. This position will support the Clean Fuels team as a renewable natural gas project engineer. In this role you would directly impact the client's goal of aggressively growing their Clean Fuels business. In this position, you will be responsible for the project engineering associated with renewable natural gas projects. Project engineering responsibilities span initial concept definition through construction and final commissioning. The position requires continuous coordination with diverse project stakeholders such as origination, development, environmental, procurement, transmission services, third party engineering firms, contractors, and project managers from early stage through construction. A major responsibility in this position is management of third-party engineering firms in support of project completion. Location: Remote with Travel 25% of the time General Job Duties & Responsibilities <ul> <li> Demonstrates a high degree of creativity, foresight, and mature judgment in planning, organizing, and guiding engineering activities </li> <li> Manages multiple projects of complex diversity and scope which are of critical importance to overall company objectives </li> <li> Responsible for all engineering related activities for one or multiple projects depending on project complexity </li> <li> Performing conceptual engineering and defining project scope </li> <li> Observance of safety requirements and ensuring safety criteria implemented in specifications and design </li> <li> Ensure permit, code and standards criteria are in specifications and design </li> <li> Writes, conforms and adapts Engineer of Record (EOR), Engineering Consultant, Early Stage Engineering, Construction, Engineer/Procure/Construct (EPC) and Owner furnished equipment specifications and other technical contract documents as needed for each project to put contracts in place (self-performed in areas of expertise, seeks appropriate in-house guidance in areas outside of immediate expertise, and where needed uses 3rd party engineering consultants) </li> </ul> <ul> <li> Reviews Engineer of Record (EOR), Engineering Consultant, Early-Stage Engineering, Contractor, Engineer/Procure/Construct (EPC) and Owner furnished equipment deliverables for contract compliance, adequacy, and completeness (self-performed in areas of expertise, seeks appropriate in-house guidance in areas outside of immediate expertise, and where needed uses third party engineering consultants when necessary) </li> <li> Working with company purchasing department to ensure that purchase orders adequately define the specified requirements and contracts are put in place </li> <li> Project evaluation and planning reviews and Engineering design and planning reviews </li> <li> Schedule Analysis and Optimization and Cost/Benefit analysis </li> <li> Offering technical support in the group and Contract reviews (non-legal) </li> <li> Ensuring quality control in accordance with project QA/QC procedures, method statements, quality plans and inspection and test plans are in contracts and monitoring </li> <li> Review and oversee EPC Contractor design and engineering </li> <li> Monitoring of equipment and material compliance with specifications </li> <li> Monitoring of engineering to ensure engineering deliverables meet project schedule needs </li> <li> Conducting site investigations and inspections to support bidding, contracting efforts and contract compliance </li> <li> Checking equipment, materials, and work in progress at the factory or in field for compliance with the specified requirements </li> <li> Resolving technical issues with engineers, suppliers, contractors, subcontractors, and statutory authorities and ensuring technical reports and record drawings are complete </li> <li> Ensuring commissioning and operational and maintenance information is adequate and provided in a timely fashion </li> <li> Supporting the project execution with technical knowledge throughout the engineering, construction, and startup phases of the project </li> </ul> Required Qualifications <ul> <li> Bachelor's - Engineering </li> <li> Experience: Qualified experience in land fill gas, digester gas production or natural gas processing projects (well head to midstream or final stage clean up preferred) with at least 4+ years pertinent experience in renewable natural gas or related projects </li> </ul> Preferred Qualifications <ul> <li> Chemical or mechanical engineering degree </li> <li> Knowledge of land fill gas integration with power production </li> <li> Knowledge of farm, food, biomass digester production of natural gas/methane </li> <li> Knowledge of conventional natural gas processing production </li> <li> Skilled in basic engineering calculations using spreadsheets and specific software such as HYSIS </li> <li> Field experience in land fill gas, digester production, natural gas processing plant or possibly refining </li> <li> Skill with Microsoft Word, Excel, PowerPoint, Outlook, Teams </li> </ul> EOE of Minorities / Females / Vets / Disability. FL: 16474 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Project Engineer, Sr.

The primary tasks will be: High-level - could change or be adapted as this role is new and under scope review. <ul> <li> Aiding with developing staff narrative documents (procedures documents) </li> <li> Assisting with various 'clean-up' tasks / projects (focus on vendor maintenance data) </li> <li> Performing audit on client credit packet entry (short-term) as automation should cause this to go away </li> <li> Aiding (as needed) with Client trade line reviews and/or collections governance </li> <li> Aiding with key projects (focus on new automation tool to aid us with getting back on track and/or staying on track) - being a resource in data mining, configuration, testing, attending meetings with me to ensure understanding of needs and that tasks are getting done by appropriate staff. <ul> <li> Credit / Collection automation (currently behind schedule) </li> <li> Accounts Payable / Purchasing automation (to start in June time frame) </li> </ul> </li> <li> Aiding with JSOX controls management / audits - performing key test audit on team </li> </ul> Job Description <ul> <li> Aiding with key projects (focus on new automation tool to aid us with getting back on track and/or staying on track) - being a resource in data mining, configuration, testing, attending meetings with me to ensure understanding of needs and that tasks are getting done by appropriate staff. <ul> <li> Credit / Collection automation (currently behind schedule) </li> <li> Accounts Payable / Purchasing automation (to start in June time frame) </li> </ul> </li> <li> Aiding with JSOX controls management / audits - performing key test audit on team </li> <li> Aiding with developing staff narrative documents (procedures documents) </li> <li> Assisting with various 'clean-up' tasks / projects </li> <li> Performing audit on client credit packet entry (short-term) as automation should cause this to go away </li> <li> Other tasks as needed </li> </ul>Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Shared Services Specialist

We are searching for a Principal Engineer - Substation to join the Engineering & Construction Business Unit team in Juno Beach, FL. The person will be all the assigned substation projects from conception (Early Stage) through construction and commissioning (Execution). In the conceptual phase, the person will work with the Early-Stage Project Manager to support the engineering requirements and scope with the Development Group. This is a 1 yr. contract assignment. Location: Remote with travel 25% Juno Beach, FL The principal Engineer- Substation will support Transmission Services during review of interconnection documentation including system impact studies, facility studies, reactive and harmonic studies and Interconnection agreements and ensures that Transmission Owner requirements and E&C engineering design are consistent and in compliance with all ISO requirements and incorporated into the project design. Must be able to work with and communicate often to the respective transmission owners/operators/ISOs to ensure project deliverables will meet specific off-taker requirements, are timely and accurate. Responsibilities include: <ul> <li> Training, due diligence, and technical oversight of external engineers of record (EOR) for all assigned substation projects to ensure compliance with required generation interconnection agreements, scope of work documents, project specifications, site specific design requirements, IEEE, NESC, ASCE and all other applicable industry codes and standards. </li> <li> Securing engineering consulting resources from a list of approved suppliers by developing a scope of work, securing bids, evaluating, and awarding work through NEER's Integrated Supply Chain (ISC) Group. </li> <li> Coordinate with other project stakeholders to develop and secure a substation site, support any engineering updates, data and permits necessary to design and build the substation. </li> <li> Competitively source, select and contracting geotechnical, survey, engineering, and construction services, and supporting the E&C Cost Estimating Team with scope assumptions. </li> <li> Coordination with other groups to ensure that the assigned E&C substation projects are successful. Generally responsible for representing E&C's internal and external interests on assigned projects, including presentations/briefing on current progress, issues, and risk mitigation in meetings with various levels of management. </li> <li> Manage all project long lead major material orders to minimize risk of delays or exceeding the project budget. Assists ISC with all substation project SOW creation, review, approval, and preparation of shopping carts for engineering services and materials in a timely manner. </li> <li> Support E&C Estimating with template update via project feedback, technical support, and scope modifications. </li> <li> Works collaboratively with project engineering resources in various disciplines to determine project priorities, work plans and lines of demarcation. </li> <li> Ensures projects are efficiently, cost effectively and safely implemented in accordance with department process, procedures, industry standards and policies. </li> <li> Support assigned project commissioning activities to meet corporate objectives. </li> <li> Support Legal in any regulatory filings, depositions and/or hearings. </li> <li> Collaborate with component OEMs to enhance/adapt their designs to better integrate with NEER's philosophies. </li> </ul> Requirements: <ul> <li> Bachelor's degree in Electrical, Mechanical or Civil/Structural Engineering is preferred. </li> <li> Must have at least 7+ years experience in Substation design and engineering of High Voltage substation projects is highly preferred. </li> <li> Project Engineering and/or Project Management experience with a strong bias for action. PMP and/or P.E. in related discipline is a plus. </li> <li> Some travel required within North America. </li> </ul>EOE of Minorities / Females / Vets / Disability. FL: 16401 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Principal Engineer - Substation

We are searching for Project Engineer - Fossil-Co-Generation for a 1 yr. contract assignment. This position will support the Clean Fuels team as a renewable natural gas project engineer. In this role you would directly impact the client's goal of aggressively growing their Clean Fuels business. In this position, the person will be responsible for the project engineering associated with Project Engineer to support our renewable fuels and conventional fuels Power Generation, Combined Heat and Power (CHP) and Cogeneration. Project engineering responsibilities span initial concept definition through construction and final commissioning. The position requires continuous coordination with diverse project stakeholders such as origination, development, environmental, procurement, transmission services, third party engineering firms, contractors, and project managers from early stage through construction. A major responsibility in this position is management of third-party engineering firms in support of project completion. Important skills include experience successfully managing schedules and budgets for major capital projects. Location: Remote with Travel 25% of the time General Job Duties & Responsibilities <ul> <li> Manages multiple projects of complex diversity and scope which are of critical importance to overall company objectives </li> <li> Responsible for all engineering related activities for one or multiple projects depending on project complexity </li> <li> Performing conceptual engineering and defining project scope </li> <li> Observance of safety requirements and ensuring safety criteria implemented in specifications and design </li> <li> Ensure permit, code and standards criteria are in specifications and design </li> <li> Writes, conforms and adapts Engineer of Record (EOR), Engineering Consultant, Early Stage Engineering, Construction, Engineer/Procure/Construct (EPC) and Owner furnished equipment specifications and other technical contract documents as needed for each project to put contracts in place (self-performed in areas of expertise, seeks appropriate in-house guidance in areas outside of immediate expertise, and where needed uses 3rd party engineering consultants) </li> <li> Reviews Engineer of Record (EOR), Engineering Consultant, Early-Stage Engineering, Contractor, Engineer/Procure/Construct (EPC) and Owner furnished equipment deliverables for contract compliance, adequacy, and completeness (self-performed in areas of expertise, seeks appropriate in-house guidance in areas outside of immediate expertise, and where needed uses third party engineering consultants when necessary) </li> <li> Working with company purchasing department to ensure that purchase orders adequately define the specified requirements and contracts are put in place </li> <li> Contract reviews (non-legal) </li> <li> Project evaluation and planning reviews and Engineering design and planning reviews </li> <li> Schedule Analysis and Optimization and Cost/Benefit analysis </li> <li> Ensuring quality control in accordance with project QA/QC procedures, method statements, quality plans and inspection and test plans are in contracts and monitoring </li> <li> Review and oversee EPC Contractor design and engineering </li> <li> Monitoring of equipment and material compliance with specifications </li> <li> Monitoring of engineering to ensure engineering deliverables meet project schedule needs </li> <li> Conducting site investigations and inspections to support bidding, contracting efforts and contract compliance </li> <li> Checking equipment, materials, and work in progress at the factory or in field for compliance with the specified requirements </li> <li> Resolving technical issues with engineers, suppliers, contractors, subcontractors, and statutory authorities </li> <li> Ensuring technical reports and record drawings are complete </li> <li> Ensuring commissioning and operational and maintenance information is adequate and provided in a timely fashion </li> <li> Supporting the project execution with technical knowledge throughout the engineering, construction, and startup phases of the project </li> </ul> Required Qualifications <ul> <li> Bachelor's - Engineering </li> <li> Experience: Qualified experience in combined cycle and simple cycle power plants, co-generation plants, and combined heat and power plants with at least 10+ years pertinent experience </li> </ul> Preferred Qualifications <ul> <li> Mechanical or chemical engineering degree </li> <li> Knowledge of combined cycle power plants </li> <li> Knowledge of co-generation plants </li> <li> Knowledge of combined heat and power plants </li> <li> Skilled in basic engineering calculations using spreadsheets and specific software such as HYSIS </li> <li> Field experience in major power plant construction, combined cycle, simple cycle, co-generation, combined heat and power </li> <li> Skill with Microsoft Word, Excel, PowerPoint, Outlook, Teams </li> </ul> EOE of Minorities / Females / Vets / Disability. FL: 16475 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Project Engineer - Fossil-Co-Generation

We are searching for Construction Manager on behalf of our client. This is a 1 yr. contract assignment. The person will act as the Owner's representative to oversee all aspects of plant and facilities construction including interconnect, site work, owner purchased material, safety, startup and commissioning, and project close out. This position is responsible for the overall management of the team and assigned projects, to ensure compliance within required budgetary, scheduling, and safety goals. Employees in this role coordinate and manage construction work performed by contractors and/or vendors at the project site. Employees in this role manage the engineering, procurement, and construction oversight-activities necessary to construct, start-up, and commence commercial operations. Location: Gentry Arkansas Job Responsibilities: <ul> <li> Oversees project operations and ensures adherence to corporate safety and quality through all site activities. </li> <li> Works collaboratively with resources and sub suppliers in various disciplines to determine project priorities, schedule and work plans to meet milestones and project schedule. </li> <li> Work with site team to ensure that the site is clean and safety protocols are being followed. </li> <li> Manages sub tier suppliers to the requirements outlined in contracts or purchase orders as the lead manager and administrator. </li> <li> Manage onsite company representative staff (Inspectors) </li> <li> Reporting daily, weekly, and monthly on progress, indicators, and recovery plans to upper management </li> <li> Ensures projects are efficiently, effectively and safely implemented in accordance with department procedures, local regulations, contracts and policies. </li> <li> Verifies constructability, ensures proper resource allocations, assesses field status and resolves issues as needed. </li> <li> Leads project meetings and reviews budget, schedule, quality, risk tracker, and contingency allocations. </li> <li> Interfaces with project's designated management committees or third parties, and acts as lead Company representative of project activities </li> <li> Ensure SWPPP and Storm water regulations and procedures are being followed. </li> <li> Manage execution requirements stipulated in the Interconnect Agreement, Purchase Power Agreement, and Independent System Operator to achieve back-feed, sync and commercial operation. </li> <li> Manages walk down of planned work, validates acceptance of completed work to design requirements, approves contractor payment requests. </li> <li> Manage Contractors to ensure project schedule is tracking to achieve project deadlines through project construction lifecycle through closeout. </li> <li> Supervises activities and/or coordinates activities or groups, such as safety programs, engineering, construction, budget, and analysis and contract administration </li> <li> Oversees commissioning activities to meet corporate objectives, with limited project management, scheduling and estimating resources. </li> <li> Ability to travel between projects as assigned. </li> <li> Construction Manager expected to be onsite daily while site is active. </li> </ul> Requirement <ul> <li> People management </li> <li> Time management and Organization skills. </li> <li> Computer skills MS word, Excel and MS PowerPoint </li> <li> Must have a valid driver license and an acceptable driving record. </li> <li> Understanding of safety construction, commissioning, and testing systems. </li> <li> Communication to third parties and executives </li> <li> Schedule and planning understanding </li> <li> Construction means and methods knowledge. </li> <li> Management means and methods knowledge. </li> </ul> Preferred Background: <ul> <li> Engineering, Construction Management, professional career in construction with past experience in Industrial or power markets. </li> <li> A background in solar construction, electrical, and utilities is preferred. </li> </ul> EOE of Minorities / Females / Vets / Disability. FL: 16572 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Construction Manager

We are searching for skilled PWR Project Engineer on behalf of our client. This is a 1 yr. contract assignment. As a key contributor, you will support the engineering team in controlling technical issues for integrating 24-month fuel cycle nuclear projects. Your responsibilities will include problem resolution, project controls, and technical coordination. You'll collaborate with in-house stakeholders and external vendors in a supportive and collaborative work environment to ensure successful project execution. Location: Remote Responsibilities: &bull; Identify and resolve technical issues related to PWRs. &bull; Identify and manage technical issues supporting schedules, budgets, and resources. &bull; Coordinate with cross-functional teams. &bull; Ensure safety and quality standards. &bull; Contribute to continuous improvement efforts. Qualifications: &bull; Bachelor's degree in engineering or related field. &bull; Extensive experience in PWR operations, fuels, or design. &bull; Strong problem-solving skills. &bull; Excellent communication and collaboration abilities. &bull; Understanding instrumentation calculations (drift/EQ/qualification) is a plus. EOE of Minorities / Females / Vets / Disability. FL: 16556 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

PWR Project Engineer

We are searching for an Senior Engineer (Electrical Engineer) on behalf of our client. This is a 1 yr. contract assignment. The person will be responsible for performing engineering assignments of a complex nature requiring application of engineering skills. The assignments involve planning and organizing projects and the application of highly specialized knowledge in carrying out the work. Provides technical support to lower-level professionals. Location: Remote Responsibilities: <ul> <li> Perform engineering tasks as assigned, applying engineering principles. </li> <li> Design modifications to the plant, including new systems, system improvements, or replacement of obsolete equipment. </li> <li> Ensure work accuracy, completeness, and timeliness, following proper configuration management. </li> <li> Utilize standard design criteria, practices, procedures, and codes to prepare plans and specifications. </li> </ul> Requirements: <ul> <li> B.S. in Engineering </li> <li> Minimum of 6 years of experience in electrical engineering systems design for nuclear power plants. </li> <li> Familiarity with the standard design change process for nuclear power plants. </li> <li> Ability to mentor and guide young engineers as needed. </li> <li> This role involves critical contributions to the safe and efficient operation of the nuclear plant, making it an exciting opportunity for experienced electrical engineers. </li> </ul> Professional Engineering certification strongly preferred EOE of Minorities / Females / Vets / Disability. FL: 16564 Employment opportunities may require access to information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States.

Candidate sign up

Employer sign up

Blog